universal joints, precision universal joints, static breaking joints, india

Universal Joints

Universal Joints

*	A Comprehensive range of Precision Universal Joints for specific applications is available to the Indian Industry.
*	From manually operated Friction bearing joints to Bracket version for medium torque / speed characteristics & Needle bearing mounted joints for high speed applications (up to 4000 rpm)
*	Stainless Steel joints also available
*	These Joints can be machined to accommodate Bores, Keyways, Square & Hexagonal holes, as standard
*	Range covers outside diameters from 10 to 95 mm - all confirming to DIN standards. Single, double & extendable type joints are available in all 3 varieties.

* Single Joint * Double Joint * Static Breaking *

Seri. No.
B
A
BORE SIZE
C N.m. SERI No. B A BROE SIZE C E N.m.

STAN-
DARD WITH KEY WAY STAN-
DARD WITH KEY WAY

SJ1 9.5 44 6 - 13 21 DJ1 13 71.5 8 - 15 21.5
44

SJ2 13 50 8 - 15 44 DJ2 16 81 10 7.5 16 25 75

SJ3 16 58 10 7.5 17 75 DJ3 19 91 12 8.5 19 27 89

SJ4 19 64 12 8.5 19 89 DJ4 22.5 111 14 11 21 35 135

SJ5 22.5 76 14 11 21 135 DJ5 25.5 122 16 12 25 36 193

SJ6 25.5 86 16 12 25 193 DJ6 29 133 18 14 26 43 331

SJ7 29 90 18 14 26 331 DJ7 32 143 20/22 16 26.5 48 600

SJ8 32 95 20/22 16 26.5 600 DJ8 38.5 162 25 19 30 54 910

SJ9 38.5 108 25 19 30 910 DJ9 44.5 194 30 22.5 34.5 67 1230

SJ10 44.5 127 30 22.5 34.5 1230 DJ10 51 218 35 27.5 38 78 1790

SJ11 51 140 35 27.5 38 1790 DJ11 57.5 245 40 32 47.5 80 2850

SJ12 57.5 165 40 32 47.5 2860 DJ12 63.5 267 45 36.5 50 89 3810

SJ13 63.5 178 45 36.5 50 3810 DJ13 76.5 318 50 44.5 56 96 7510

SJ14 76.5 222 50 44.5 66 7510 DJ14 89 365 65 53 78 111 11010

SJ15 89 254 65 53 78.5 111010 DJ15 102 410 70 62 94 118 15850

SJ16 102 292 70 62 94 15850 - - - - - - - -

Introduction : OKI Universal Joints provide a simple & economic method of connecting two shafts whose axes are inclined at an angle. They are also used when the angle varies during rotation eliminating the need for the complicated & expensive mechanisms usually associated with this type of application.

Lubrication : For both intermittent & continuously rated joints where constant lubrication (such as an oil bath) is not available joint covers for grease packing are recommended.